ACCURATE.
SAFE. CLEAR.
SAFE. CLEAR.
M Lewis, S D Smith (2021): 'The Development of FSW Process Modelling for Use by
Process Engineers', Friction Stir Welding and Processing XI, 161-170.
LINK
S D Smith (2019): 'Consideration of a proposed SBAD method for BS7910', International
Journal of Pressure Vessels and Piping, 168, December 2018, 142-147.
LINK
M Dodge, S D Smith, T London, K Sotoudeh, R Morana, S Kabra (2016):
‘Assessment of residual stress and suitability for subsea service of a welded
superduplex stainless steel flange joint’, Paper OMAE2016-54004, Proceedings
of the ASME 2016 35th International Conference on Ocean, Offshore and Arctic
Engineering, OMAE2016, June 19-24, 2016, Busan, Korea.
LINK
N O'Meara, H Abdolvand, J A Francis, S D Smith and P J Withers (2016): 'Quantifying
the metallurgical response of a nuclear steel to welding thermal cycles' Materials
Science and Technology, 32, 14, 1517-1532.
LINK
M Rethmeier, M Mochizuki, D J Dewees, V Robin, C Ohms, A Youtsos, S D Smith,
D Schwark (2015): ‘prCEN ISO/TS 18166:2015 - Numerical welding simulation - Execution
and Documentation’, In: ‘Mathematical Modelling of Weld Phenomena 11’,
Publisher: Verlag der TechnischenUniversität Graz, Ed: S Sommitsch, N
Enzinger, P Mayr, 873 - 882.
LINK
N O'Meara, S D Smith, J A Francis (2015): 'Calibrating Phase Transformation and Grain
Growth Models and Measuring Phase Dependent Material Properties for Use in FE
Simulations of Welds', Conference: ASME 2015 Pressure Vessels and Piping Conference,
At Boston, Massachusetts, USA, Volume: PVP2015, Paper No PVP2015-45936.
LINK
N O’Meara, J A Francis, P J Withers, S D Smith (2015): ‘Using free dilatometry
to develop, calibrate and validate a Phase Transformation and grain growth model
for use in welding residual stress simulations’, Structural Materials
in Reactor Technology conference, Manchester.
LINK
M F Gittos, K Sotoudeh, S D Smith, H Pisarski, M Milititsky (2015):
‘Failure of an 8630M low alloy steel to C-Mn steel dissimilar metal weld,
made using nickel alloy 625 welding consumables’, NACE conference.
LINK
N O'Meara, J A Francis, S D Smith, P J Withers (2014): 'Development of Simplified Empirical Phase
Transformation Model for Use in Welding Residual Stress Simulations',
ASME/PVP 2014, At Anaheim, California, USA, Volume: Proceedings of the ASME 2014
Pressure Vessels and Piping Conference, Paper No. PVP2014-29100.
LINK
N O’Meara, J A Francis, S D Smith, P J Withers (2014): 'The effects of repetitive
austenisation and peak temperature on phase transformations and its significance
in the simulation of multi-pass welds’, 16th International Conference on Experimental
Mechanics, 7 - 11 July 2014 University of Cambridge UK.
LINK
T London, P Jamshidi, S Maleki, S E Eren, S D Smith (2014): 'Assessment
of Locally Thinned Areas (LTAs) in Pipe Structures Subject to Global Bending',
Paper No 2014-TPC-0586 ISOPE 2014.
LINK
H G Pisarski, S D Smith, T London (2014): ‘Flaw tolerance of pipelines containing
circumferential flaws subjected to axial straining and internal pressure - tests
and analyses’, International Journal of Offshore and Polar Engineering,
Vol. 24, No. 3, September 2014, pp 199-205.
LINK
I Hadley, S D Smith (2014): ‘Effects of mechanical loading on residual
stress and fracture: development of the BS 7910:2013 rules’, Paper PVP2014-28152,
Proceedings of the ASME 2014 Pressure Vessels and Piping Conference ASME/PVP
2014 July 20-24, 2014, Anaheim, California, USA.
LINK 1 and
LINK 2
I Hadley, S D Smith (2014): ‘Effects of mechanical loading on residual stress
and fracture: validation of the BS 7910:2013 rules’, Paper PVP2014-28092,
Proceedings of the ASME 2014 Pressure Vessels and Piping Conference ASME/PVP
2014 July 20-24, 2014, Anaheim, California, USA.
LINK 1 and
LINK 2
T London, S D Smith, S E Eren (2014):‘Three-dimensional finite element
simulations of elastic and elastic-plastic crack growth using automated re-meshing
techniques', Paper PVP2014-28425, Proceedings of the ASME 2014 Pressure
Vessels and Piping Conference ASME/PVP 2014 July 20-24, 2014, Anaheim, California, USA.
LINK
P Bastid, S D Smith (2013): ‘Numerical analysis of contact stresses between mooring
chain links and potential consequences for fatigue damage’, Proc 32nd International
conference on ocean, offshore and arctic engineering, OMAE, 2013, paper
OMAE2013-11360.
LINK
Y Zhang, S D Smith, L Wei, C Johnston, A Stacey (2013): ‘Residual stress measurement
and modelling’, Proc 32nd International conference on ocean, offshore and
artic engineering, OMAE, 2013, paper OMAE2013-10234.
LINK
H G Pisarski, S D Smith, T London (2013): ‘Flaw tolerance of pipelines containing
circumferential flaws subjected to axial straining and internal pressure - Tests and
Analyses’, 23rd ISOPE, Anchorage, USA, 2013.
LINK
S D Smith (2012): ‘Development of the BS 7910 Failure Assessment Diagram
for Strain Based Design with Application to Pipelines’, Paper OMAE2010-83527,
Proceedings of the ASME 2012 31st International Conference on Ocean, Offshore
and Arctic Engineering, OMAE 2012,Pipeline & Riser Technology Symposium,
July 1-6 2012, Rio de Janeiro, Brazil, ISBN 978-0-7918-4490-8, 431-436.
LINK
Y-H Zhang, S D Smith, L Wei, C Johnston (2012): 'Residual stress measurements
and modelling', HSE Research Report RR938, Prepared by TWI Limited
for the Health and Safety Executive 2012
LINK
S J Maddox, M J Doré, S D Smith (2011): ‘A case study of the use of ultrasonic
peening for upgrading a welded steel structure’, IIW-2203-11
(XIII-2326-10),and Welding in the World September 2011,
Volume 55, Issue 9-10, pp 56-67.
LINK
L Wei, W He, S D Smith (2011): ‘The effects of loadings on welding residual
stresses and assessments of fracture parameters in a welding residual
stress field’, ASME 2011 Pressure Vessels & piping division
conference, PVP2011, paper PVP2011-57518.
LINK
W He, L Wei, S D Smith (2010): ‘Intensive validation of computer prediction of
welding residual stresses in a multipass butt weld’, Paper OMAE2010-20490,
Proceedings of the 29th International Conference on Ocean, Offshore and Arctic
Engineering (OMAE 2010), SYMP 4 Pipeline and Riser Technology, June 6-11
2010, Shanghai, China.
LINK
S D Smith, R Saraswat (2009): ‘Accurate thermomechanical modelling of Friction
Stir Welding using simple material data and commercial CFD software’,
NAFEMS World Congress, Crete, 2009.
LINK
S D Smith, H G Pisarski, C Vlattas (2007): ‘Modelling and measurements for
the assessment of a full scale pipe bend test’, Paper presented at ISOPE 2007,
Seventeenth International Offshore and Polar Engineering Conference,
Lisbon, 1-7 July 2007.
LINK
K A Beamish, A Ezeilo, S D Smith, P Lewis, P Cheetham, C Blignault (2006):
'Development of a low cost FSW monitoring system', 6th Int FSW symposium,
Saint Sauveur, Canada, October 2006.
LINK
H G Pisarski, W Xu, S D Smith (2006): ‘Fracture mechanics assessment of
flaws in pipeline girth welds’, Proceedings of HSLP-IAP, International
Seminar on Application of High Strength Line Pipe on Integrity Assessment
on Pipeline 2006, 15-16 June, Xi'an, China.
LINK
R V Preston, H R Shercliff, P J Withers, D Hughes, S D Smith, SD and Webster, PJ (2006): 'Synchrotron
X-ray measurement and finite element analysis and of residual strain in TIG welded aluminium
alloy 2024', Metallurgical and Materials Transactions A, 37, 3629-3637.
LINK
R V Preston, H R Shercliff, P J Withers, S D Smith (2004): 'Physically-based constitutive
modelling of residual stress development in welding of aluminium alloy 2024',
Acta Materialia, 52, 17, 4973-4983.
LINK
R V Preston, H R Shercliff, P J Withers, S D Smith (2003): 'Finite element modelling of tungsten inert
gas welding of aluminium alloy 2024', Science and Technology of Welding and Joining, 8, 1, 10-18.
LINK
R M Sanderson and S D Smith (2002): ‘The application of finite element modelling
to guided ultrasonic waves in rails’, Insight, 44(6) 359-363, June 2002.
R M Sanderson and S D Smith (2002): ‘The use of guided waves for non destructive
testing of rails: A finite element approach’, ABAQUS conference,
Warrington, 12-13 November 2002.
R M Sanderson and S D Smith (2002): ‘The application of finite element
modelling to guided wave testing systems’, QNDE conference, Bellingham,
14-19 July 2002.
W M Thomas, E D Nicholas, S D Smith (2001): ‘Friction stir welding - tool
developments’, 2001 TMS Annual Meeting, New Orleans, Feb 2001.
LINK
R A Ainsworth, J K Sharples, S D Smith (2000): ‘Effects of residual
stresses on fracture behaviour - experimental results and assessment
methods’, J Strain Analysis, 2000, 35, 4, 307-316.
LINK
R V Preston, S D Smith, H R Shercliff, P J Withers (1999): ‘Some issues when modelling
interfacial constraint during welding’, Poster in: 38th Annual conference of Metallurgists,
Quebec, Quebec, Canada, Aug 1999.
R V Preston, S D Smith, H R Shercliff, P J Withers (1999):
'An investigation into the residual stresses in an aluminium 2024 test weld', American Society of
Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP 393, 265-277.
LINK
S D Smith (1997): 'Comparison of the PD6493:1991 Rho (ρ) factor
with FEA results', SINTAP report SINTAP/TWI/1-2, September 1997.
LINK
C S Wiesner, S D Smith (1996): ‘Investigations into the Pellini drop-weight
test for characterising structural crack arrest behaviour’, Conference:
ECF 11, EMAS 1996, 2013-2018.
LINK
R H Leggatt, D J Smith, S D Smith, F Faure (1996): ‘Development and experimental
validation of the deep hole method for residual stress measurement’, J
Strain Analysis, 1996, 31, 3, 177-186.
LINK
S D Smith, H G Pisarski, R H Leggatt (1994): ‘Influence of residual stresses on
crack driving force for weld metal with under and overmatching yield strength’,
Mis-Matching of welds 1994, 573-587.
C S Wiesner, B Hayes, S D Smith, A A Willoughby (1994): ‘Investigations into the
mechanics of crack arrest in large plates of 1.5%Ni TMCP steel’,
Fatigue & Fracture of Engineering Materials & Structures,
17, 2, 221-233.
LINK
S D Smith (1992): ‘A review of weld modelling for the prediction of residual
stresses and distortion due to fusion welding’, Paper 4, Conference: Computer Technology
in Welding, Cambridge, June 1992.
T H Hyde, S D Smith (1990): ‘Creep crack growth from a semi-circular surface
crack in a creep-ductile material’, J Strain Analysis, 25, 1, 1-8.
LINK
T H Hyde, J J Webster, S D Smith (1990): ‘Assessment of continuum damage and C* approaches
to predicting creep crack growth’, 4th International conference on
Creep and Fracture of Engineering Materials and Structures, Swansea,
Inst Metals, 715-727.
LINK
S D Smith, J J Webster, T H Hyde (1990): ‘Finite element prediction of creep
crack growth from a semi-circular surface crack in lead alloy’, Int conference
on applied stress and analysis, Nottingham.
LINK
S D Smith, J J Webster, T H Hyde (1989): ‘Three-dimensional damage calculations for creep
crack growth in 316 stainless steel’, I M Allison, C Ruiz (Eds.),
Applied Solid Mechanics - Amsterdam: Elsevier, 363-378.
LINK
S D Smith, J J Webster, T H Hyde (1989): ‘Finite element investigation of creep
crack growth from surface thumbnail cracks’, Engineering fracture mechanics,
34, 3, 625-635.
LINK
S D Smith, J J Webster, T H Hyde (1988): ‘Finite element simulation of elastic-creep
growth of a semicircular surface crack’, Engineering fracture mechanics,
31, 6, 947-957.
LINK
S D Smith, J J Webster, T H Hyde (1988): ‘Creep behaviour of a stationary
semi-circular surface crack’, Engineering fracture mechanics,
30, 1, 105-116.
LINK
S D Smith, T H Hyde, J J Webster (1987): ‘Elastic-creep behaviour of compact tension
test pieces’, 3rd International conference on Creep and Fracture of
Engineering Materials and Structures, Swansea, Pineridge Press.
LINK
S D Smith (2019): 'The Fatigue Performance of Welded Joints', Integrity of Structural
Joints Subjected to Fatigue Loads, 4 July 2019, AMRC, Sheffield
LINK
S D Smith (2016): ‘ISO/TS 18166 Numerical Welding Simulation:
Execution and Documentation’, Presentation to IMechE Seminar:
'Residual Stress - Measurement, Temperature and Performance',
Institution of Mechanical Engineers, London, 17 February 2016.
LINK
S D Smith (2014): ‘FEA in Fatigue Design using BS7608’, Presentation
at NAFEMS seminar on ‘Current Best Practices in Fatigue Analysis
using FEA’, Imperial College, London, 16th September 2014.
S D Smith (2014): ‘TWI, Structural Integrity and Abaqus’, Presentation
at United Kingdom SIMULIA Regional User Meeting November
4-5, 2014 Park Royal Hotel.
LINK
S D Smith (2013): ‘Welding residual stresses in engineering critical
assessment (ECA)’, Presentation to IMechE Seminar: ‘Residual stress engineering:
Developing control, measurement and characterisation techniques’,
Manchester Conference Centre, 31st January 2013.
LINK
S D Smith (2012): ‘Numerical Simulations for the Integrity of Welded
Structures’, Presentation to FESI Seminar ‘Numerical Solutions in
Fracture Integrity Management’, Imperial College, London,
27th September 2012.
S D Smith (2010): ‘Validation of computer prediction of welding
residual stresses’, Presentation to IMechE Seminar:
'Residual Stresses - When do they Matter?',
EdF, Barnwood, 14 October 2010.
S D Smith (2010): ‘Fatigue design based on the structural
hot spot stress’, Presentation to IMechE Seminar:
'Advanced Design and Life Assessment Methods for
Pressure Plant Seminar',
Institution of Mechanical Engineers, London, 29 June 2010.
LINK
S D Smith (2010): ‘Advances in the fundamental basis of ECA for SBD',
Presentation to seminar: 'Strain Capacity of Pipelines I', OMAE2010-2119,
29th International
Conference on Ocean, Offshore and Arctic Engineering (OMAE 2010),
Shanghai, China from June 6-11, 2010.
LINK
overview |
details |
|